Threshold Fine Adjustment - Panasonic HG-F Series User Manual

5.2 Threshold Fine Adjustment

5.2 Threshold Fine Adjustment

■
Overview
This function allows you to adjust the threshold value (unit: mm) to any desired value on the
measurement display.
1.
Press the UP key or DOWN key in the normal measurement mode, and the preset
threshold value will be displayed.
2.
Press the UP key or DOWN key and adjust the threshold value.
After adjusting the threshold value to a desired value, press the TEACH key to set the new
threshold value.
● If you do not make key operation for 3 seconds after changing the threshold value, the
changed value is set as a new threshold value and the screen returns to the
measurement display.
● Holding down the UP key or DOWN key will make the threshold value change faster.
Setting item
Threshold fine adjustment (When
the zero set is cleared)
Threshold fine adjustment (When
the zero set is set)
(Note 1) The settable maximum and minimum values of the threshold are affected by the hysteresis setting.
(Note 2) The settable maximum and minimum values of the threshold are affected by the zero set distance and
the hysteresis setting.
5-6
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com
Set value
(Note 1)
250 to 3,000
(Note 2)
-2,750 to 2,750
Default value
1,000
WUME-HGF1UM-2