5.14 External Input Setting
● The emitted laser beam is turned ON when the external input is turned OFF from ON. The
laser radiation indicator is lit when the emitted laser beam is turned ON.
● The timing chart for stopping or clearing the emission using the external input is as shown in
the following diagram.
● If the external input time is short, the lit / unlit state of the indicator may not match the emission
state.
● When emission stop is performed during teaching, a teaching error occurs.
5-36
Ramco Innovations www.ramcoi.com Got Questions? Phone 800-280-6933 Email nsales@ramcoi.com
WUME-HGF1UM-2