Displaying Peak Weight - KERN HTS Series Operating Instructions Manual

Clearing the accumulator
6.9

Displaying peak weight

To do this, the weighing mode must be set as Hold Mode, see User menu chapter 7.4.
In this situation the totalising function is not available.
In Hold mode the crane scale can display the maximum weighed load and then hold this
in the display.
Activating peak weight mode
To start a peak weight measuring cycle in gross or net mode, press the MODE and
TOTAL in succession.
The PEAK LED lights up.
While the PEAK LED is lit, the scale stores the highest load value of a weighing (peak
value).
Recalling the peak weight
Press the F key, the heaviest load of the last weighing will flash in the display.
Returning to weighing mode
Press the F key again.
HTS-BA-e-1024
Press repeatedly the F key to recall the
1.
first digits of the accumulated weight (H...)
Press key →0← in order to delete the
2.
amount accumulator.
3. Confirm SAVE with the mode key.The
accumulator is cleared; the crane scale is
back to gross mode.
.
39