Calling Up The Gross Weight And Tare Value; Displaying Weight Values With A Higher Resolution; Displaying The Capacity Available; Dynamic Weighing - KERN FTC Operating Instructions Manual

Operation
2.5
2.6
2.7
2.8
With manual start
15

Calling up the gross weight and tare value

1. Press .
The gross weight is displayed for 2 seconds.
2. Press again while the gross weight is displayed.
The tare value is displayed. After a few seconds, the scale changes back to the net
weight display.

Displaying weight values with a higher resolution

➜ Press
.
The current weight value is displayed for 2 seconds in a higher resolution. The
scale then changes back to the normal resolution.

Displaying the capacity available

The scale has a graphic display of the scale capacity available. The bar indicates how
many per cent of the scale capacity is already occupied and what capacity is still
available. In the example, approx. 65 % of the scale capacity is occupied.

Dynamic weighing

With the dynamic weighing function, it is possible to weigh restless weighing samples
such as live animals. If this function is activated, the symbol
play.
With dynamic weighing, the scale calculates the mean value from 56 weighing oper-
ations within 4 seconds.
Prerequisite
AVErAGE -> MAnuAL is selected in the menu.
The weighing sample must be heavier than 5 scale divisions.
1. Place the weighing sample on the scale and wait until it has stabilized.
2. Press to start dynamic weighing.
During dynamic weighing, horizontal segments appear in the display, and the
dynamic result is then displayed with the symbol *.
3. Unload the scale to be able to start a new dynamic weighing operation.
FTC-BA-e-0720
appears in the dis-
User manual ME-Nr.22017145 01/07