Table of Contents
Advertisement
Operation
8.9
Peak value function
The peak value function displays the highest load value (peak value) of a weighing.
The measuring frequency is 200 ms.
32 | en
Press [HOLD]
During measurement a countdown appears on
the display and <> starts flashing
When the mesaurement is finished, <> and
the weighing result are displayed
Press any key to exit the display again
Select peak value function in the function menu
(see chapter 9.2)
Hang the weighing material on the hook
The peak value is displayed by a <> top left in
the display
The peak value is displayed for approx. 5
seconds. If during the display a greater peak
value is measured, the new value will be
displayed automatically.
CH-BA-e-2440
Advertisement
Table of Contents
