Description Of Service Menu - KERN HTS Series Operating Instructions Manual

8.3

Description of service menu

Factory settings are printed in bold.
F1.2 – Digital filter
The digital filter stabilises the weight display when
0 Filter off
1 Filter setting low
2 Filter setting medium (factory setting)
3 Filter setting high
F1.5 – Tare operation
Tare operation can be enabled or disabled.
0 Tare function off
1 Tare function on (factory installation)
F1.6.2 – Auto zero operation
Zero setting within a set threshold value can be done automatically by the crane scale.
0 Automatic reset off (factory setting)
1 Automatic reset in +/–0.5 d area
2 Automatic reset in +/-1.0 d area
3 Automatic reset in +/-3 d area
F1.6.3 – Auto zero with power up
When the crane scale is powered up it will re-zero based on the tolerances below.
0 Automatic reset off when switching on (factory setting)
1 Automatic reset when switching on in +/–2% area
2 Automatic reset when switching on in +/-10 % area
3 Automatic reset when switching on in +/-100 % area
52 HTS-BA-e-1024