Table of Contents
Advertisement
7. User menu
In the master mode you can modify parameters concerning your specific weighing
application.
7.1
Overview
The crane scale menu consists of two areas: The user menu and the service menu for
service technicians, see chapter 8. Operation is the same in both areas.
The user menu parameters are represented by numbers in the display.
Parameter
No.
Name
F2.4.1
Minimum weight for
totalising
F2.4.2
Totalising mode
F2.5
Weighing mode
F3.1
Sleep mode
F3.2
Display luminosity
F3.6.1
Upper boundary value
F3.6.2
Lower boundary value
F3.6.3
Weighing help
F3.7
Save status
F3.8
Remote control
function
F4.3
Display test
F4.4
Keyboard test
F5.1
Exit menu
If no factory settings have been given, then they depend on the model or on the country
and its respective laws on measures and calibration.
7.2
Accessing the user menu
Press the buttons Mode and a simultaneously.
The final parameter F3 group of the user menu shall be displayed. No LED is lit. The
scale is ready for modifying parameters.
HTS-BA-e-1024
Factory settings
Value
Meaning
0
Totalising is not possible
0
off
0
normal
1
On
0
very light
0
Off
0
Off
1
On
0
Skip display test
0
Skip keyboard test
1
Save changed settings
43
Advertisement
Table of Contents
