Call up current tare weight
In net mode press the F key.
The tare weight is displayed and the Tare LED lights.
Note:
With the F key you can switch between net and tare weight. See chapter 6.7 for working
with the accumulation function.
Clearing tare weight
In net mode press the C key.
The tare weight is cleared.
The gross weight is displayed and the Gross LED lights.
6.6
Working with the tare weights saved
The crane scale has 10 memories (storage areas 0...9) for tare weights
The first storage space (0) shall be used for numerical and manual tares. Weights
saved here shall be overwritten with manual or numerical tares. For saving tare weights
that are used frequently, storage spaces 1 ... 9 should be used.
Note:
Tare weights can only be stored without decimal places.
HTS-BA-e-1024
.
35