10. Maintenance & Cleaning; Regular Maintenance - KERN HTS Series Operating Instructions Manual

Electronic crane scale
Table of Contents

Advertisement

10. Maintenance & Cleaning
Risk of injury and damage! The crane scale is part of the lifting gear!
For safe operation observe the following:
Danger
10.1

Regular maintenance

The regular 3-month service must only be carried out by experts with through
knowledge of working with crane scales. When doing this, national accident
prevention regulations, as well as the operator's work, operating and safety
regulations are to be taken into account.
The regular 12-month service must only be carried out by trained experts (KERN
service).
The results of this service are to be entered into the checklist (chapter 10.2).
The additional results of the extended service are to be entered into the checklist
(chapter 11.1).
Replaced parts are also to be entered, (chapter 11.2)
HTS-BA-e-1024
Have regular inspections be done by trained experts,
Carry out regular servicing and maintenance, see chapters 10.1 and
10.2
Have parts replaced only by trained experts.
If there are discrepancies with the safety checklist, then the scale
should not be used.
Do not repair the crane scale yourself. Repairs must only be carried
out by service partners authorised by KERN.
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hts150k 50ipHts300k 100ipHts600k 200ipHts1.5t 0.5ip

Table of Contents