Verification - KERN HTS Series Operating Instructions Manual

F5.1 – End service menu
1 Save settings
2 Restores the most recently saved parameters
3 Resets the factory settings information
When "restore factory settings" has been selected, "SURE" shall appear in the display
Confirm this enquiry with the Mode key.
8.4

Verification

General:
According to the EU guideline 90/384/EEC balances must be verified officially if they are
to be used as follows (legally regulated area):
a) For commercial transactions if the price of goods is determined by weighing
b) For the production of medicines in pharmacies as well as for analyses in the
medical and pharmaceutical laboratory
c) For official purposes
d) For the production of finished packages
In case of doubt, please contact your local office of weights and measures.
Verification information
An EU qualification approval is available for those balances marked as appropriate for
verification in the technical data. In the event that the balance is applied in an area
subject to verification as described above, it must be officially verified and re-verified at
regular intervals.
Re-verification of a balance is carried out in compliance with the respective legal
provisions of the states. The term of verification validity for balances in Germany, for
example, is normally 2 years.
The legal provisions of the country of use are to be observed.
After verification the seal screw is plumbed with a seal thread.
Verification of the balance is invalid without the seal.
58 HTS-BA-e-1024