Table of Contents
Advertisement
6.3
Turn on/off
Switching on
Press and hold the On/Off key on the keyboard of the scale.
The display illuminates and the scale runs a self test.
The self test is complete when weight value 0 is shown on the display. The crane scale
works in gross mode.
Note:
Switching on is only possible via the keyboard of the scale.
Switching Off
Press and hold the On/Off key on the keyboard of the scale.
or
Press the Off key on the remote control.
6.4
Resetting the scale
For best weighing results set the empty scale to zero before weighing.
Resetting is only possible if the weight value shown is within the preset zero area (see
user menu, chapter 8.3) and if the scale is not moving, i.e. the „LED
Manual setting to zero
Press button →0← in gross mode.
0 (kg) shall appear in the display and "LED →0←" shall illuminate.
Auto zero with power up
With this function activated in the Service menu (not accessible on verified scales) (see
chapter 8.3), the scale is automatically set to zero after powering up.
HTS-BA-e-1024
" is not lit up.
33
Advertisement
Table of Contents
