Description Of The User Menu - KERN HTS Series Operating Instructions Manual

7.4

Description of the user menu

Factory settings are printed in bold.
F2.4.1 – Minimum weight for totalising
The current set minimum weight for totalising is displayed immediately.
Use the MODE key to confirm the displayed minimum weight
Enter the minimum weight for totalising using the remote control.
or
Press the a key and use the Tare and F keys to enter the minimum weight for
totalising.
Note
For totalising, the minimum weight must be >0.
F2.4.2 – Totalising
0 Totalising off (factory setting)
1 Manual totalising
2 Automatic totalising
Note
When using automatic totalising, the weight value between two successive weighings
must decrease by at least 10 digits, to be recognised as a new totals value.
F2.5 – Weighing mode
0 Normal weighing (factory setting)
1 Hold mode
2 Weighing with tolerance range
Note
• In Hold mode the scale displays the maximum weight up to that point and holds this
value in the display. The Total LED lights up. In this mode, totalising is not possible.
• When weighing with a tolerance range is selected, you will see the parameters
F3.6.1 to F3.6.3 in the User menu.
HTS-BA-e-1024 47