Christie D Series Service Manual page 96

UPPER COOLING FAN (DC FAN CY6023RPWM-G4L251) and peripheral
Disassembling
1) Release harness from LMP FAN HOLDER
2) Remove 3 screws to remove RC-LED
HOLDER.
3) Remove 3 screws to remove LMP FAN
HOLDER.
REMC-Front PCB (PWB Assy FRONT-RC) and LED PWB
Disassembling
1) Bend 2 tabs to remove LED PCB and
disconnect the connector.
2) Disconnect the connector from REM REMC-
Front PCB and pull out the PCB upward.
CNRCF needs to gone
through this duct.
FRONT IR PWB LED PWB
CNRCF
CNLED
CNRCF needs to gone
through this hole.
CNRCF needs to
gone through this rib.
LWU701i/LW751i/LX801i/LWU601i/LW651i
Service Manual
LWU701i / LW751i / LX801i / LWU601i / LW651i
RC-LED HOLDER
Top View
FRONT IR PWB needs to Confirm all 3 tabs
be inserted to the bottom.
are firmly fixed.
Front View
95
Aassembling
To reinstall, perform above steps in reverse.
Wiring
Refer to page 67 for wiring.
LMP FAN HOLDER
Aassembling
1) Insert REM FRONT PCB to the slit to
connect.
2) After connecting the cable to LED PCB, slide
Wiring
Refer to page 60 for wiring.
Paste cushion
not onto LED.
020-000793-01
LIT MAN SERV D2