Christie D Series Service Manual page 31

6-5 Installing the Batteries
Always handle the batteries with care and use them only as directed. Improper use may result
surrounding environment.
time. Do not mix a new battery with used one.
adheres to your body or clothes, rinse well with water immediately.
Insert the batteries into the remote control before using it. If the remote control starts to malfunction,
replace the batteries. If not using the remote control for long period, remove the batteries from the
remote control and store them in a safe place.
2. Align and insert the two AA batteries according to their plus and minus terminals as indicated in
according to laws and regulations.)
1
Replacing the internal clock battery
Replace a battery according to the following procedure.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool
the projector, so that the bottom is facing up.
3. Turn the battery cover fully in the direction indicated "OPEN" using a coin,
5. Replace the battery with a new HITACHI MAXELL, Part No.CR2032 or
CR2032H. Slide the battery in under the plastic claw, and push it into the
6. Replace the battery cover in place, then turn it in the direction indicated
"CLOSE" using a coin.
LWU701i/LW751i/LX801i/LWU601i/LW651i
Service Manual
LWU701i / LW751i / LX801i / LWU601i / LW651i
WARNING
2
30
3
90°
Battery Cover
90°
OPEN
CLOSE
020-000793-01
LIT MAN SERV D2