Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features. ® projector with high resolution Multilanguage Menu Display Operation menu is available in 12 languages; This projector is compatible with Full HD signals, English, German, French, It alian, Spanish, allowing high definition projection.
To The Owner Safety Precaution Before installing and operating the projector, read this manual thoroughly. WARNING: THIS APPARATUS MUST BE EARTHED. The projector provides many convenient features and TO REDUCE THE RISK OF FIRE OR ELECTRIC functions. Operating the projector properly enables you to SHOCK, DO NOT EXPOSE THIS APPLIANCE TO manage those features and maintains it in good condition for RAIN OR MOISTURE.
Safety Instructions All the safety and operating instructions should be read This projector should be operated only from the type of before the product is operated. power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.
Safety Instructions Moving the Projector Retract the adjustable feet to prevent damage How to move the projector by one person to lens and cabinet. For safety, holding the projector on both sides by 2 or more people is recommended to move the projector because the projector is heavy.
Compliance Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Part Names and Functions Projection Lens (Option) Indicators Front Infrared Remote Receiver (Front) Handle Adjustable Feet Side Control Terminals and Connectors Main On/Off Switch Power Cord Connector Lamp Cover Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector.
Part Names and Functions Terminals and Connectors USB CONNECTOR (Series B) S-VIDEO INPUT JACK USB connector is used to service the projector. Connect the S-VIDEO output signal from video equipment to this jack. (p.21) 5 BNC INPUT JACKS Connect the component or composite video SERIAL PORT IN TERMINAL output signal from video equipment to VIDEO/Y, If you control the projector by computer, you must...
Part Names and Functions Side Control and Indicators Indicators Side Control Side Control ON/STAND-BY button AUTO PC ADJ. button Turn the projector on or off. (pp.24,25) Automatically adjust the computer image to its optimum setting. (pp.28, 36) SHUTTER button LIGHT button Close and open up the built-in shutter.
Part Names and Functions Indicators POWER indicator This indicator lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (pp.57 , 77-79) LAMP Indicator This indicator is dim when the projector is turned on.
Part Names and Functions Remote Control ON/STAND-BY button Turn the projector on or off. (pp.24-25) AUTO PC button Automatically adjust the computer image to its optimum setting. (pp.30, 36) LIGHT button Light the buttons on the remote control for about 10 seconds. MENU button Open or close the On-Screen MENU.
Part Names and Functions Remote Control Battery Installation Open the battery Install new batteries into Replace the compartment lid. the compartment. compartment lid. Two AA size batteries For correct polarity (+ and –), Pull up the lid be sure battery terminals are and remove it.
Part Names and Functions Remote Control Code The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control.
Installation Lens Installation Before setting up the projector, install Projection Lens on the projector. Before installation, check where the projector is used and prepare a suitable lens. For the specifications of Projection Lens, contact sales dealer where you purchased the projector. - Lens installation and replacement should be made by the qualified service personnel.
Installation Lens Shift Adjustment Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen. (See page 28) The display position can be shifted upward up to 55% elevation of the display.
Installation Terminals of Projector The projector has two replaceable Interface board slots. The projector's functions can be extended by installing the optional interface boards into the terminal slots. 1 vacant slot (Input 3) is provided in your purchasing the projector. For the Optional Interface Boards, contact sales dealer where you purchased the projector. INPUT/OUTPUT TERMINALS 2 TERMINAL SLOTS (Factory set)
Installation Connecting to Computer Cables used for connection DVI Cable BNC Cable (BNC x 5) ( *One cable is supplied; Other cables are not supplied with this projector.) Laptop type Desktop type Monitor Output Monitor Monitor Monitor Output Input Output BNC Cable Cable Cable...
Installation Connecting to Video Equipment Cables used for connection Monitor Out Signal Table Video Cable (BNC x 3, BNC x 1) Input Terminal Monitor Out Cable SCART-VGA Cable RGB (PC analog) D-sub15 DVI Cable RGB (SCART) S-Video Cable RGB (PC digital) Input 1 DVI-D RGB (AV HDCP)
Installation Attaching the Cable Cover Cover It is recommended to attach the cable covers to protect the Strap insertion slot terminal area from dust when hanging the projector from the ceiling. Please connect the covers to the projector with the provided straps to prevent the covers from falling off.
Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 or Holes 200–240 V AC. It is designed to work with single-phase Fixing power systems having a grounded neutral conductor. To bracket reduce the risk of electrical shock, do not plug into any other type of power system.
Basic Operation Turning On the Projector Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. Connect the projector’s AC power cord into an AC outlet and turn on the MAIN ON/OFF Switch. The LAMP indicator lights red and the POWER indicator lights green.
Basic Operation Turning Off the Projector Press the ON/STAND-BY button on the side control or on the remote control, and “Power off?” appears on the screen. Press the ON/STAND-BY button on the side control or on the remote control again to turn off the projector.
Basic Operation How to Operate the On-Screen Menu Side Control The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. MENU button Press the MENU button on the side control or the remote control to display the On-Screen Menu.
Basic Operation Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 74-76. For Computer Source Guide Window Image Adjust Menu Used to adjust the computer image. [Contrast/ Brightness/ Show the selected Menu of the On-Screen Menu. Color management/Auto picture control/BrilliantColor/Color Input Menu temp./White balance (R/G/B)/Offset (R/G/B)/Sharpness/...
Basic Operation Operating with Projector Control Zoom Adjustment Side Control Display “Zoom” on the screen. Press the ZOOM button SHUTTER button and then press the point buttons to zoom in and out LIGHT button the image. ZOOM button LENS SHIFT Focus Adjustment button Display “Focus”...
Page 31
Basic Operation Information Information Menu Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Information Menu Press the INFORMATION button to display the information window on the screen. Press the Point button or the INFORMATION button again to display the next page.
Basic Operation Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. AUTO PC button Remote Control Press the AUTO PC button on the remote control to operate the Auto PC Adj.
Basic Operation Remote Control SHUTTER button See page 28 for details. SHUTTER button FILTER button This button does not work in the default state. When a filter cartridge (supplied) has been installed in the projector, it works as follows: Press and hold the FILTER button for more than five IMAGE ADJ.
Input Selection Input Side Control Side Control button operation INPUT button INPUT 1 INPUT 2 INPUT button INPUT 3 INPUT 4 Side Control Operation Press the INPUT button on the side control. It switches to INPUT 1, INPUT 2, INPUT 3 and INPUT 4 as you press the Remote Control button operation INPUT button.
Input Selection Computer Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals Press the MENU button to display the On-Screen Menu. INPUT MENU Use the Point buttons to move the red frame pointer to the INPUT Menu icon. Input Menu icon Use the Point buttons to move the red arrow pointer...
Input Selection Video Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals INPUT MENU When connecting to video equipment, select the type of Video source in the Source Select Menu. Input Menu icon RGB (Scart) When scart video equipment is connected to the INPUT 1 Move the pointer (red arrow) to Input (ANALOG) terminal, select RGB (Scart).
Computer Input Computer System Selection Automatic Multi-Scan System This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 80-81). If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings.
Computer Input Auto PC Adjustment Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer. Remote Control Direct Operation The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote AUTO PC button control or the AUTO PC ADJ.
Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.
Page 40
Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All To clear the adjusted data. adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the SELECT button.
Computer Input Image Level Selection Direct Operation Remote Control Press the IMAGE SEL. button on the remote control to select the desired image level. Standard IMAGE SEL. button Real Dynamic DICOM Image1 Image 10 Menu Operation IMAGE SELECT MENU Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the Image Select Menu icon.
Computer Input Screen Size Adjustment Select the desired screen size that conforms to the input signal source. Press the MENU button to display the On-Screen Menu. SCREEN MENU Use the Point buttons to move the red frame pointer to the Screen Menu icon. Use the Point buttons to move the red frame pointer Screen Menu icon...
Page 43
Computer Input SCREEN MENU Keystone This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Use the Point buttons to switch between each option. Store.
Video Input Video System Selection Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the AV System Menu icon. Use the Point buttons to move the red arrow pointer to the desired system and then press the SELECT button.
Video Input Image Level Selection Direct Operation Press the IMAGE SEL. button on the remote control to Remote Control select the desired image level. Standard IMAGE SEL. button Cinema Dynamic DICOM Image1 Image 10 Menu Operation Press the MENU button to display the On-Screen Menu. IMAGE SELECT MENU Use the Point buttons to move the red frame pointer...
Video Input Screen Size Adjustment Press the MENU button to display the On-Screen Menu. SCREEN MENU Use the Point buttons to move the red frame pointer to the Screen Menu icon. Use the Point buttons to move the red frame pointer Screen Menu icon to the desired function and then press the SELECT button.
Page 47
Video Input Keystone SCREEN MENU This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Use the Point buttons to switch between each option. Store.
Picture Image Image Adjustment Press the MENU button to display the On-Screen Menu. IMAGE ADJUST MENU Use the Point buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point buttons to move the red frame pointer Image Adjust Menu icon to the desired item and then press the SELECT button to display the adjustment dialog box.
Page 49
Picture Image COLOR SELECTION MODE (continued) COLOR SELECTION MODE COLOR M. Level and phase Gamma Return to the COLOR MANAGEMENT POINTER. (If you adjustment palette. adjustment palette. press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) MENU Return to the IMAGE ADJUST Menu.
Page 50
Picture Image White balance (Red/Green/Blue) Press the Point button to lighten red/green/blue tone; press the Point button to deepen red/green/blue tone (from 0 to 63). Offset (Red/Green/Blue) Press the Point button to lighten red/green/blue tone of the black level of an image; press the Point button to deepen red/ green/blue tone of the black level of an image (from 0 to 63).
Setting Setting This projector has a Setting menu that allows you to set up other various functions. Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer SETTING MENU (Language) to the Setting Menu icon. Use the Point buttons to move the red frame pointer to the desired item and then press the SELECT button.
Page 52
Setting Background The selected background screen will be displayed when no Note: input signal is detected. Blue . . . Blue colored background. User . . . The image you captured. Black. . . Black colored background. Lamp mode Note: This projector is equipped with 2 projection lamps and the number of using lamps can be switched to 2 lamps or 1 lamp.
Page 53
Setting Picture in Picture Status (Stored /Free/ Selected Mode Adj.) of the selected mode. Picture in Picture This function is used to project two videos simultaneously Use the Point by placing a separate small sub screen within or next to the buttons to adjust main screen.
Page 54
Setting Edge blending This function allows multiple projector images to be seamlessly Edge blending overlapped. Use the Point buttons to move the red frame pointer to Edge blending and then press the SELECT button to display a dialog box. Use the Point buttons to adjust the setting value.
Page 55
Setting Advanced color matching Advanced color matching ..Set to ‘On‘ to activate the ‘Advanced color matching’. When it is set to ‘Off‘, all items except for ’Test pattern’ are displayed in grayout and cannot be adjusted. Measured .
Page 56
Setting HDMI setup HDMI setup Select Normal or Enhanced according to the output signal of video equipment. Press the Point buttons to switch between each option. Normal ..When the output of video equipment is set to “STANDARD.
Page 57
Setting Logo PIN Code Lock Logo PIN code lock This function prevents an unauthorized person from changing the screen logo. Off ..The screen logo can be changed freely from the Logo Menu. On ..The screen logo cannot be changed without a Logo PIN code.
Page 58
Setting Note: Filter control This function does not work in the default state. When a filter cartridge (supplied) has been installed in the projector, it works as follows: You can replace the filter with this function. Press the SELECT button at Filter control to display a confirmation box. To replace, press the SELECT button at “YES”...
Page 59
Setting Power management Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period. Time left before the lamp is off If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal”...
Page 60
Setting Security Security Key lock This function locks the side control and remote control buttons to prevent operation by unauthorized persons..Unlocked..Lock the side control buttons. Set the red frame To unlock, use the remote control.
Page 61
Setting Enter a PIN code Enter a PIN code Use the Point buttons on the side control or on the remote control to enter a number. Press the Point button to fix the number and move the red frame pointer to the next box. The number changes to “ . ” Repeat this step to complete entering a four-digit number.
Page 62
Setting Shutter Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Protection Prohibits the shutter operation from the remote control and the projector's side control. Remote control . . . Selecting "On" prohibits the shutter operation from the remote control.
Page 63
Setting Filter counter Scrolls remaining . . Show the scroll counter and the Reset options. When the filter scroll is counted down to 1 (Scroll counter on the screen is showing “0 scroll(s)” , the last scroll icon Set the red frame pointer (Fig.
Maintenance and Care Optional Filter Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector.
Maintenance and Care Installing the Filter Cartridge Turn off the projector, press the Main On/Off Switch to Filter cover Off and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents.
Maintenance and Care Resetting the Filter Counter Filter counter This function does not work in the default state. When a filter cartridge (supplied) has been installed in the projector, it works as follows: Be sure to reset the Filter counter after replacing the filter cartridge.
Maintenance and Care Lamp Management This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the status on screen or on the LAMP 1/2 REPLACE indicators. This function also automatically controls the Lamp Mode when any of lamps is out for the end of life or malfunctions.
Maintenance and Care Lamp Replacement When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP 1/2 REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP 1/2 REPLACE indicators should light is depending on the lamp mode.
Maintenance and Care ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. Model No. of your projector Replacement Lamp Type No. 003-120504-01 (Service Parts No. 610 343 5336) LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly.
Maintenance and Care Optional Color Wheel Installation The projector comes with the high brightness color wheels installed. Additional rich color reproduction color wheels are supplied. To replace the color wheels, refer to the following steps. SCREW Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet.
Maintenance and Care Cleaning the Projection Lens Turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.
Maintenance and Care Warning Indicators The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING TEMP . indicator and the LAMP indicator to take proper maintenance. The projector is shut down and the WARNING TEMP. Indicators indicator is blinking red.
Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21. 2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected.
Page 74
Appendix – The end of lamp life is approaching. Replace the lamp with a new one promptly. (See page 66) appears on the screen When a filter cartridge (supplied) has been installed in the projector; – The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 62-63) appears on the screen –...
Page 75
Appendix The power is turned off – Power management function runs by initial setting. Check “SETTING” section on page 57 . automatically. You cannot operate with – The side control is not available If the side control is locked at “Key lock” under “Security”...
Appendix Menu Tree Computer Input/Video Input Input Input 1 RGB (PC analog) Go to System RGB (Scart) RGB (PC digital) Go to System RGB (AV HDCP) Go to System HDMI Go to System Input 2 Go to System Y, Pb/Cb,Pr/Cr Go to System Video Go to System...
Page 77
Appendix Computer Input System Image Select Mode 1 Standard Mode 2 Real SVGA 1 Dynamic SVGA 2 DICOM SVGA 3 Image 1 System displayed in the System Menu varies depending on the input signal. Image 10 PC Adjust Screen Auto PC adj. Normal Fine sync.
Page 78
Appendix Computer Input/Video Input Fan control Normal/Max Setting Remote Control Code 1 Code 8 Language 12 languages provided. Quit Quit RC sensor All/Front & Top/Top & Back/Front & Back/ Menu Position/Simple Menu/Menu size/Quit Front/Top/Back Display Off/Countdown Off/On Off/Ready/Shut down Power management Background Blue/User/Black 1–30 Min.
Appendix Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally. Indicators Projector Condition WARNING WARNING LAMP 1/2 POWER LAMP SHUTTER TEMP . FILTER REP . blue green orange orange The projector is off. (The main On/Off switch is OFF position or the AC power cord is unplugged.) The projector is in stand-by mode.
Page 80
Appendix The projector is detecting abnormal condition. Indicators Projector Condition WARNING WARNING LAMP 1/2 POWER LAMP SHUTTER TEMP . FILTER REP . green blue orange orange The temperature inside the projector is elevated close to the abnormally high level. The temperature inside the projector is abnormally high.
Page 81
Appendix The projector is detecting abnormal condition. Indicators Projector Condition WARNING WARNING LAMP 1/2 POWER LAMP SHUTTER TEMP . FILTER REP . green blue orange orange If the Filter counter reached a time set in the timer setting, a Filter replacement icon (Fig.2) appears on the screen and the WARNING FILTER indicator on the top panel lights up.
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. ON-SCREEN ON-SCREEN RESOLUTION H-Freq.(kHz) V-Freq.(Hz) RESOLUTION H-Freq.(kHz) V-Freq.(Hz) DISPLAY DISPLAY VGA 1 640x480 31.470 59.880...
Page 83
Appendix ON-SCREEN RESOLUTION H-Freq.(kHz) V-Freq.(Hz) DISPLAY 1920x1080 33.750 30.000 1920x1080 28.125 25.000 1080p 1920x1080 27 .000 24.000 1920x1080 67 .500 60.000 1920x1080 56.250 50.000 1080psf/30 1920x1080 33.750 60.000 1080psf/25 1920x1080 28.125 50.000 1080psf/24 1920x1080 27 .000 48.000 When an input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN ON-SCREEN RESOLUTION H-Freq.(kHz) V-Freq.(Hz)
Appendix List of Picture in Picture On-Board Optional Interface Board Dsub Component HDCP Input1 Input2 Dsub Component -DVI -S-video -DVI Analog PC On-Board Scart Input1 Digital Analog PC On-Board Component Input2 Video/ S-Video o : Picture in Picture combinations are enabled - : Picture in Picture combinations are disabled Note: 750 User Manual...
Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 15.75” x 9.55” x 20.57” (400.0 mm x 242.5 mm x 522.5 mm) Net Weight 43.34lbs (19.7 kg) Feet Adjustment 0˚ to 5˚ DLP Chip Projection System 0.95”...
Appendix The specifications are subject to change without notice. Each projector has its own characteristics. When projecting with several projectors on the same screen or side by side, you may recognize different white balance and color uniformity on each projector. Optional Parts The parts listed below are optionally available.
Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) Input Red Input +5V Power Green Input Ground (Vert. sync.) Blue Input Ground DDC Data No Connect Ground (Horiz.sync.) Horiz. sync. Ground (Red) Vert. sync. Ground (Green) DDC Clock Ground (Blue) Output Red Output No Connect...
Appendix PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No.
Appendix How to adjust multiple screens With the Edge blending and Color matching functions, you can seamlessly display the images from more than two projectors. Follow the steps below to adjust multiple projector images. Edge blending Confirm if you use the same type of color wheel (high brightness or rich color reproduction color wheel) for each projector, and set the same screen size and image level.
Page 91
Appendix Set ‘Test pattern’ to ‘On’ to display a 50 % white image. The overlap area will be brighter than the non-overlapping area. Adjust the Black level in the Edge blending dialog box to increase the brightness of the non-overlapping area so that the unevenness is reduced.
Page 92
Americas Canada Chile Christie Digital Systems USA, Inc. Christie Digital Systems Canada, Inc. Representative Office 10550 Camden Drive 809 Wellington St. N. Christie Digital Systems USA, Inc. Cypress CA 90630 Kitchener, Ontario N2G 4Y7 Av. Pedro Fontova 7619 of 60...