Christie D Series Service Manual page 94

Replacement of EXHAUST FAN 1 (DC FAN 9GA09P-PWM-Z4L171)
Replacing the exhaust FAN1
1. Release the harness from the clips.
2. Release the fan harnes from the ferrite core.
3. Remove the five screws securing the lamp exhaust duct.
5. Remove the fan.
6. To reinstall the fan, perform the above steps in reverse.
Regarding the assembling, pay attention as follows.
1) Attach the FAN CUSHION.
When you replace the EXHAUST FAN 1, please prepare also eight pieces of FAN CUSHION.
Refer to the chapter "
FAN CUSHION
0~0.5
0~0.5
0~2
0~2
0~0.5 FAN CUSHION
0~0.5
2) Arrange the fan cable.
Fold and secure the cable with a tape
(NITTO tape No.5, W=9mm is recom-
mended). Refer to the chapter "
" for the detail of arrangement.
LWU701i/LW751i/LX801i/LWU601i/LW651i
Service Manual
LWU701i / LW751i / LX801i / LWU601i / LW651i
" for the FAN CUSHION.
0~2
0~0.5
0~0.5
0~2
0~2
0~0.5
0~0.5
93
Exhausting direction
020-000793-01
LIT MAN SERV D2