Christie D Series Service Manual page 38

6-11 PIN LOCK System
If the following PIN BOX menu appears after power on the projector, the PIN LOCK system has
the PIN LOCK system, we need to input the correct 4 digits PIN Code. If correct PIN Code is not
input in 5 min., the lamp will be automatically turned off.
Returning repaired unit
NOTE:
The Master PIN Code can be used up to 30 times. The codes cannot be used thereafter. If the
Master PIN Code cannot be used, see the paragraph of the PIN LOCK system inactivation.
Swap unit/Returned unit
Release all security systems. See the paragraph of the PIN LOCK system inactivation.
The PIN LOCK system inactivation
1. When the PIN BOX menu is displayed, press RESET button for 3 seconds or more in order to
get the ID Inquiring Code.
Inquiring Code
2. Send CHRISTIE servicing provider the Inquiring code (10 digits) to inquire the correct PIN code.
3. While the PIN BOX is displayed, enter the correct PIN Code that CHRISTIE servicing provider
informed.
4. Open menu and select "TURN OFF" from the PIN LOCK items in the SECURITY menu. Then
the PIN BOX menu appears.
Password is required to display the SECURITY menu.
See the SECURITY menu: User's Manual - Operating Guide.
5. Input the correct PIN code in the PIN BOX menu.
6. And then, PIN LOCK will be set to "OFF".
7. Inactivate the My Screen PASSWORD, Transition Detector and My Text PASSWORD as well.
And re-set the Security Password to the factory default number as below.
Model
LWU601i/LWU701i
LW651i/LW751i
LX801i
See the SECURITY menu: User's Manual - Operating Guide.
LWU701i/LW751i/LX801i/LWU601i/LW651i
Service Manual
LWU701i / LW751i / LX801i / LWU601i / LW651i
PIN BOX
MENU
PIN BOX (ID Inquiring Code)
Password
6514
4814
6414
37
KEYSTONE
020-000793-01
LIT MAN SERV D2