Christie D Series Service Manual page 14

4-8 Setup of the projector
The following contents are also described in User's manual.
ZOOM / FOCUS
1. The ZOOM or FOCUS dialog will appear when you press any of the buttons from ZOOM, ZOOM
-, ZOOM +, FOCUS + and FOCUS -.
2. Use the ZOOM + / - buttons on the remote control or ZOOM button and
the projector to adjust the screen size.
LENS SHIFT
Press the LENS SHIFT button. The LENS SHIFT dialog will
played shifts the lens.
CENTERING
< With the LENS SHIFT dialog>
Press the ENTER or INPUT button.
< In the standby mode>
Press the LENS SHIFT and the FUNCTION buttons for 3
seconds at the same time.
While the lens is moving to the center, the menu disappears
and an hourglass icon appears on the screen. CENTERING
The CENTERING feature while the projector is in the standby mode is disabled if the STANDBY
MODE item of SETUP menu is set to POWER SAVE. Perform CENTERING before the projector's
power is turned off, or set the STANDBY MODE to NORMAL.
The adjustable range of LENS SHIFT varies depending on the lens unit mounted on the projector to
maintain picture quality. Therefore, LENS SHIFT adjustment may not reach the end of the indicator
in the dialog. This is not a failure.
LENS MEMORY SAVE / LOAD / CLEAR
This projector is equipped with memory functions
for the lens adjustments (LENS SHIFT and LENS
TYPE).
To utilize the lens memory feature, press the
POSITION or FUNCTION button while the LENS
SHIFT dialog is displayed.
< SAVE>
To save the current lens adjustments, select a SAVE-(1-3) and press
< LOAD>
Using the LENS MEMORY button, the memory can be loaded without the LENS MEMORY dialog.
< CLEAR>
Select CLEAR LENS MEMORY and press the
dialog will be displayed. Select the number to be cleared using
memory.
LWU701i/LW751i/LX801i/LWU601i/LW651i
Service Manual
LWU701i / LW751i / LX801i / LWU601i / LW651i
13
-
or ENTER button.
ENTER button.
or ENTER button. The CLEAR LENS MEMORY
buttons and press the
cursor buttons on
020-000793-01
LIT MAN SERV D2