Christie D Series Service Manual page 84

STATUS MONITOR
Disassembling
2) Flip the stopper of ER50 (FPC connector)
of the REMOTE-R PCB to release the FPC
cable.
4) Release the STATUS MONITOR from the
STATUS MONITOR
REMC-Rear PCB (PWB Assy REAR-RC)
Disassembling
2) Disconnect the cable.
Assembling
1) Connect the cable to PCB.
2) Set the PCB between tabs.
Wiring
Refer to page 61 for wiring.
LWU701i/LW751i/LX801i/LWU601i/LW651i
Service Manual
LWU701i / LW751i / LX801i / LWU601i / LW651i
LCD CUSHION
83
Assembling
1) Attach the STATUS MONITOR to the
2) Turn the stopper of ER50 of the REMOTE-R
PCB to fasten the FPC.
when you replace the STATUS MONITOR.
Attach the cushion to the edge of the STATUS
MONITOR.
NOTE:
Align the cushion to the frame of CONTROL
BUTTON as shown in the drawing.
0~0.5mm
LCD CUSHION
020-000793-01
LIT MAN SERV D2