BALLAST UNIT and AC WATCH
Disassembling
2) Remove one more screw while the sheet is
3) Disconnect 3 connectors.
AC WATCH PCB
Assembling
1. Preparation
HOLDER (plastic mold).
BALLAST HOLDER.
Outside
BALLAST SHIELD
BALLAST HOLDER
(Continued on next page)
LWU701i/LW751i/LX801i/LWU601i/LW651i
Service Manual
LWU701i / LW751i / LX801i / LWU601i / LW651i
Inside
BALLAST SHEET
87
5) Remove 2 screws.
6) Disconnect 2 connectors.
7) Remove AC WATCH PCB.
8) Remove 3 harnesses from rib.
9) Remove sheet.
Tabs
Insert the BALLAST SHEET into
the slits as shown this picture to
020-000793-01
LIT MAN SERV D2