Christie D Series Service Manual page 82

LWU701i / LW751i / LX801i / LWU601i / LW651i
INPUT PCB
Disassembling
1) Disconnect 4 connectors on the INPUT PCB.
2) Remove two screws on INPUT PCB to separate the insulating sheet.
3) Remove a screw and six hexagonal screws for D-sub connectors from the I/O METAL.
·m)
Insulating sheet
2 screws (M3x8, silver, 0.49±0.1N·m)
Assembling
3) Connect the 4 connectors to INPUT PCB.
4) Set I/O METAL and tighten a screw and 6 D-sub hex screws.
Wiring
Refer to page 59 for wiring.
LWU701i/LW751i/LX801i/LWU601i/LW651i 81 020-000793-01
Service Manual LIT MAN SERV D2