Chapter 3
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press <DEL> key to
enter Setup.
If the message disappears before you respond and you still wish to enter
Setup, restart the system by turning it OFF and On or pressing the RESET
button. You may also restart the system by simultaneously pressing <Ctrl>,
<Alt>, and <Delete> keys.
<↑>
<↓>
<← >
<→ >
<Enter>
<Esc>
<+/PU>
<-/PD >
<F1>
<F5>
<F6>
<F7>
<F10>
Entering Setup
Press DEL to enter SETUP
Control Keys
Move to the previous item
Move to the next item
Move to the item in the left hand
Move to the item in the right hand
Select the item
Jum ps to the Exit m enu or returns to the m ain m enu from a sub
Increase the num eric value or m ake changes
Decrease the num eric value or m ake changes
General help, only for Status Page Setup Menu and O ption Pa
Setup M enu
Restore the previous C MOS value from CMOS, only for Option
Setup M enu
Load the default CMOS value from Fail-Safe default table, only
Option Page Setup Menu
Load Optim ized defaults
Save all the CMO S changes and exit
3-30