VIA Technologies P4XB-S User Manual page 80

Chapter 4
Driver Installation for Windows
1. Insert the supplied CD disk into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Click on C-Media Sound Drivers and and follow the on-screen instruc-
tions to complete the installation.
4. After completion of the installation, please restart Windows system for
new driver installation. The system will install the device drivers
automatically.
Driver Installation for Windows
Note: We recommend that you install Windows NT 4.0 before you install
this PCI audio card, and you not install any other sound card device
drivers in your current system.
1. Click "Start", move the highlight bar to "Setting", and select the "Con-
trol Panel".
2. Double-click "Multimedia".
3. Select "Devices", and press "Add".
4. Select "Unlisted or Updated Driver" in "List of Drivers".
5. Specify the drive path where NT drivers are in (such as D:\NT40\DRV).
6. Select "C-Media CM8738," and press "OK".
7. Select proper I/O value.
8. Press "OK."
9. Restart the system when being asked.
10. Now, you have already installed the PCI Audio Adapter under Microsoft
Windows NT 4.0 successfully. If you want to install the Windows
applications, continue the following steps:
11. Click "Start".
12. Select "Run".
13. Key in drive path where the Windows NT application installation pro-
gram are in; for example, "D:\NT40\APP\SETUP.EXE"
14. Click "OK" to start the installation procedure, and follow the on-screen
instructions to complete the installation. When all of application soft-
ware has been installed, shut down the Windows NT system, then
reboot your system.
®
98/ME/2000
®
NT 4.0
4-72