VIA Technologies P4XB-S User Manual page 60

Chapter 3
Instant-Off
Delay 4 Sec.
Power/Sleep LED
This item sets how the system uses Power LED on the case to indicate the
sleep state. Settings are:
Single LED The Power LED blinks to indicate the sleep state.
Dual LED
IRQ/Event Activity Detect
Press <Enter> to enter the sub-menu and the following screen appears:
PS2KB Wakeup Select, PS2KB Wakeup from S3/S4/S5, PS2MS
Wakeup from S3/S4/S5, USB Resume from S3, VGA, LPT & COM,
HDD & FDD, PCI Master, PowerOn by PCI Card, Wake Up On LAN/
Ring
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
Note: To use the function of "Wake Up On LAN/Ring", you need to
The power button functions as a normal power-on/-
off button.
When you press the power button, the computer en-
ters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer is
turned off.
The Power LED changes its color to indicate the sleep
state.
3-52