Table of Contents
Advertisement
④
3. Replacing a print head
Step 1: Remove the old print head.
(1) Turn off the printer and open the front cover.
(2) Remove the ribbon cartridge, remove the retaining screws, hold the print head
with one hand, and pull it out.
(3) After removing the head, disconnect print head wire carefully, minding the wiring
harness.
(Caution: Print head may be HOT)
Step 2: Installing the new print head.
(1) Connect the new print head to the wiring harness.
(2) Install the head and tighten the screws.
②
①
Figure 94 Printer head setup
Figure 95 Printer head disassemble
94
③
Advertisement
Table of Contents
