Option Installation (Laminator); Figure 42 Install Laminator Module 1; Figure 43 Install Laminator Module 2 - idp SMART-81 User Manual

2.7. Option Installation (Laminator)

Step 1: Mount module binding bracket to the bottom of the printer
(1) Turn off Printer, open top cover, remove card stacker, and install the binding
bracket under the printer as shown in Figure 42.
Step 2: Fitting module (Laminator)
(1) Place the module to be installed (Laminator) to the binding bracket as shown in
Figure 42. Then the plug in the Laminator.
(2) Turn on the module (Laminator) first and then turn on the printer.
(3) When the Laminator module is installed successfully, and printer will display
SMART-81D (if duplex) and L for Laminator.

Figure 42 Install Laminator Module 1

Figure 43 Install Laminator Module 2

46