Programme Selection; Controls - Miele PWM 511 Operating And Installation Instructions

Supervisor level

Controls

Opening the
Supervisor level
(launderette mode)
64

Programme selection

Useful tip: Start by configuring all necessary settings and changes to
the washing machine before adjusting any of the options below.
If "Launderette, basic" or "Launderette Logo" is selected, the
supervisor level can no longer be opened from the display after the
Supervisor level is closed. Please follow the instructions below if you
wish to change any other settings.
Switch on the washing machine and open the door.

Touch the Start/Stop sensor and hold it down during steps -.

Close the washing machine door.

Wait until the Start/Stop sensor, which is now flashing rapidly,

lights up constantly.
Release the Start/Stop sensor when the Start/Stop sensor lights up

constantly.
Standard (factory default setting).
All functions and programmes can be displayed.
Launderette, basic
Up to 12 programmes are available. Go to
select which programmes are to be listed.
Launderette logo
Up to 12 programmes are available. Go to
select which programmes are to be listed.
External programme selection
Programmes are selected using a communication module, e.g. an
external terminal.
Favourite programmes
Favourite programmes
to
to