Time; Date; Volume; Visibility Parameters - Miele PWM 511 Operating And Installation Instructions

Time

Date

Volume

Visibility
parameters

Sorting Extras

"Machine off"
status
After selecting the clock format, you can set the time of day.
Clock format
- 24 h clock
- 12 h clock
- No clock
Set
- The time can be set.
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault alarm
The fault alarm can be activated or deactivated.
Various parameters, such as the temperature, spin speed, Extras
etc., are displayed when a programme is selected. You can decide
which parameters should not be displayed. These parameters can
then not be edited during programme selection.
Factory default: all parameters are visible (marked in orange)

Visibility parameters

In the setting
line. Touch the sensor to change the sequence of Extras (see
"Supervisor level – Arranging programmes").
In order to save energy, the washing machine will switch off
automatically after the end of the programme or if no further
selection is made. This can be changed.
Changing this setting leads to increased energy consumption.
- No switch-off
- Switch off after 15 minutes (factory default)
Supervisor level
Sort Extras
, appears in the bottom
61