Table of Contents
Advertisement
Controls
Opening the Su-
pervisor level
(wash-salon ver-
sion)
Programme selection
You can select whether the washing machine is operated as a
"wash-salon" (launderette) machine. Shortcuts are the easiest way
to operate the machine. Operating staff are unable to change pre-set
programmes.
Tip: start by configuring all necessary settings and changes to the
washing machine before adjusting any of the options below.
If "WS simple" or "WS advanced" are selected, the supervisor level
can no longer be opened from the display after the Supervisor level is
closed. Please follow the instructions below if you wish to change any
other settings.
Switch on the washing machine and open the door.
Touch the Start/Stop sensor control and hold it down whilst carry-
ing out steps -.
Close the washing machine door.
The Start/Stop sensor will now be flashing quickly; wait until it
lights up constantly.
Release the Start/Stop sensor control when the Start/Stop sensor
lights up constantly.
Standard (factory default).
All functions and programmes can be displayed.
Launderette, basic
Up to 12 programmes are available. Go to
select which programmes are to be listed.
Laundrette Logo
Up to 12 programmes are available. Go to
select which programmes are to be listed.
External programme selection
Programmes are selected using a communication module, e.g. an ex-
ternal terminal.
Supervisor level
Favourite programmes
Favourite programmes
to
to
57
Advertisement
Table of Contents
