Changing The Programme Sequence; Changing A Programme; Altering The Wash Programme; Cancelling A Programme - Miele PWM 511 Operating And Installation Instructions

Altering the wash
programme

Changing the programme sequence

Changing a programme

Before selecting a new programme, cancel the current programme
and select a new one.

Cancelling a programme

You can cancel a programme at any time after it has started.
Touch the Start/Stop sensor.

The following will appear in the display:
 Cancel the programme?
Yes
Select .

The following will appear in the display:
Programme cancelled
The suds are not drained. If a new programme is selected, the suds
can continue to be used. If the programme is cancelled, the Drain or
Spin programme can be selected to remove the suds.
Wait until the door unlocks.

Pull open the door.

Remove the laundry.

Switching on the washing machine after an interruption
to the power supply
If the washing machine is switched off with the  button during a
wash programme, the programme will be interrupted.
Switch it back on with the  button.

Note the message in the display.

Touch the Start/Stop sensor.

The programme will also be interrupted if power is interrupted by a
power cut.
When power is restored, confirm the message in the display with

OK.
Touch the Start/Stop sensor.

The programme will continue.
.
57