Table of Contents
Advertisement
Further settings
90
Moving a programme: allocating programme selection
buttons
You can sort the programme selection list to suit your requirements
and therefore also allocate the programme selection buttons ,
and .
Open the menu as follows:
button
Further settings
Move programme
Move programme
All released programmes are shown in the programme list (see
"Further settings/Programme release"). A programme's position in the
programme list is decisive for allocating the programme selection
buttons. Programmes are numbered from 1 - n. The first three
programmes in the list are allocated to the programme selection
buttons; for example:
1. Vario TD Inst 4trays
-
2. Vario TD Inst 6trays
-
3. Vario TD MIS
on programme selection button
-
4. Vario TD Instr 8 mesh trays
-
5. Vario TD AN
-
- etc.
Use the and arrow buttons to select the programme you would
like to move.
Confirm your selection with OK.
Now you can move this programme within the list.
Use the and arrow buttons to move the programme to the
position you want.
Press OK to save the programme to the selected position.
The programme which was previously saved to this position and all
subsequent programmes are moved down by one position.
The process can be repeated as often as you wish.
Press the button to exit the menu.
1.
Vario TD Inst 4trays
2.
Vario TD Inst 6trays
on programme selection button
on programme selection button
Advertisement
Table of Contents
