Adding Or Removing Laundry - Miele PWM 511 Operating And Installation Instructions

Commercial washing machine
Hide thumbs Also See for PWM 511:
Table of Contents

Advertisement

Changing the programme sequence
58

Adding or removing laundry

You can add or remove laundry items during the first few minutes
after the programme has started.
Status
Time left
Coloured
items
Add laundry
Touch the
Add laundry
If the message
longer possible to add items of laundry.
The programme will stop and the door will unlock.
 Risk of chemical burns from detergent.
When adding or removing laundry during the main wash, your skin
may come into contact with detergent, particularly if the detergent
is dispensed externally.
Take care when placing your hands inside the drum.
If suds have come into contact with the skin, rinse off immediately
with lukewarm water.
Pull open the door.
Add laundry or remove individual items.
Close the door.
Touch the Start/Stop sensor.
The wash programme will continue.
The door lock will remain activated if the temperature in the drum is
above 55 °C. The door lock will not deactivate until the temperature
has dropped to below 55 °C.
11:02
0:49
h
Main wash
Add laundry
 sensor.
is not visible in the display, then it is no

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PWM 511 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Pwm 511 el dp ddPwm 511 el dv dd51511003aus51511001aus

Table of Contents