Drainage; Drain Valve; Drain Pump; Drainage Options - Miele PWM 511 Operating And Installation Instructions

Drain valve

Drain pump

Drainage options

Drainage

The washing machine is drained using a motorised drain valve. A
DN 70 angle connector can be used for draining the machine via an
on-site floor drain (gully with odour trap).
The suds are drained through a drain pump with a 1 m delivery head.
For the water to drain freely, the hose must be free of kinks. The
swivel elbow at the end of the hose can be turned in either direction
or removed as needed.
1. Connected securely to a plastic drain pipe with a rubber sleeve
(there is no need to use a siphon).
2. Connected over the rim of the laundry trough or into the sud-
saver pipe of the laundry trough.
3. Connected securely to a floor drain (gully).
If required, the hose can be extended to a length of up to 5 m. The
necessary parts can be ordered from Miele (depending on country).
For a drain height of more than 1 m (up to a max. of 1.6 m), a
replacement drain pump is available from the Miele Professional
Service Department.
Installation
53