Programme Packages; Sort Programmes; Prog. Colour Allocation; Expert Code - Miele PWM 511 Operating And Installation Instructions

Programme
packages

Sort programmes

Moving
programmes
Prog. colour
allocation

Expert code

The selection of programmes can be expanded by activating single
programmes from the target group programme packages.
The programmes selected from the programme packages (marked in
orange) are displayed during programme selection.
Programmes can be moved within the programme list and in the
Favourites list.
Factory default setting: Off
Touch the sensor control for the programme you want to move.

Press and hold the sensor until the frame changes.

Drag the programme to the required position.

You can assign a colour to a Favourite programme. In the Favourites
list, each Favourite programme is given a coloured frame, which can
be adjusted.
Factory default setting: On
A code needs to be entered to cancel a disinfection programme. The
code can be changed.
The code is: 0 0 0
Make a note of your new code if you ever change it.
Supervisor level
65