Changing The Programme Sequence; Cancelling A Programme; Interrupting A Programme; Changing A Programme - Miele WKB 130 Operating Instructions Manual

Table of Contents

Advertisement

Cancelling a programme

You can cancel a programme at any
time after it has started:
 Press the Start/Stop button.
The following will appear in the display:
Cancel programme
 Touch the OK sensor.
The suds will be pumped away. The
following will appear in the display:
Prog. cancelled
 Pull open the door.
 Remove the laundry.
If you want to select a different
programme
 Close the door.
 Select the programme you want.
 Add detergent to the detergent
dispenser drawer, if necessary.
 Press the Start/Stop button.
The new programme will begin.

Interrupting a programme

 Switch the washing machine off with
the  button.
 Switch the washing machine back on
with the  button to continue with
the same programme.

Changing the programme sequence

Changing a programme

After the start of a programme it is no
longer possible to select a different
programme.
Temperature
With the exception of the Cottons
programme, it is possible to select a
different temperature up to 5 minutes
after the programme has started.
 Press the Temperature button.
 Use the ,  and OK sensors to
change the temperature.
Spin speed
It is possible to change the spin speed
up until the final spin begins.
 Press the Spin speed button.
 Use the ,  and OK sensors to
change the spin speed.
Options
It is possible to select or deselect the
Short and Water plus options up to 5
minutes after the programme has
started.
Tip: It is not possible to make any
changes to the programme or to cancel
it if the safety lock has been activated.
39

Advertisement

Table of Contents
loading

Table of Contents