Altering the wash
programme
Changing the programme sequence
Changing a programme
You will need to cancel the current programme before you can select
a new one.
Cancelling a programme
You can cancel a wash programme at any time after it has started.
The payment programmes or the disinfection programmes can only
be cancelled by entering a code.
Touch the Start/Stop sensor control.
The following appears in the display:
Programme stopped. Continue with "Start/Stop"
The following appears in the display:
Programme stopped.
Continue with "Start/Stop"
Finish
Select
.
The suds are not drained so they can be used again in a subsequent
programme. Once the programme has ended, the programme end
screen is displayed. It is possible to switch to the main menu while
the suds are in the drum or to drain the suds by pressing the
draining
control.
The drum door remains locked while there is water in the machine.
The door can be opened under the condition
water
.
Wait until the door unlocks.
Pull open the door.
Remove the laundry.
Switching on the washing machine after an interruption
to the power supply
If the washing machine is switched off with the button during a
wash programme, the programme will be interrupted.
Switch the washing machine back on with the button.
Note the message in the display.
Touch the Start/Stop sensor control.
The programme continues.
11:02
2:27
Finish
Start
Programme end without
37