Table of Contents
Advertisement
4
INSTALLATION METHOD
4-1
WALL INSTALLATION METHOD
1
sensor body.
Cover
Sensor body
Installation plate
2
the space shown by the dotted lines is allocated before
0.39"(10 mm)
When installing using
the same installation
holes as those for the
PB-F/PB-IN-HF series
3
the screws.
About the grommet
This work is required as an insect-proof and drip-proof
countermeasure for the sensor exterior.
Cover fixing screw
Sensor fixing screw
0.39"(10 mm)
Marking
When installing in the
switch box.
Label
Self-tapping screw
for installation
(φ4x30)
Note: Accessories
Installation
plate
Grommet
15 mm
φ
φ
φ
section shown by the dotted lines in the
tools. Be sure to caulk the cut section as an
insect-proof countermeasure.
4
the installation plate.
About the cut bush
This work is required as an insect-proof and dust-proof
countermeasure for the sensor exterior.
5 WIRING METHOD
5
6 OPTICAL AXIS ADJUSTMENT to adjust
the optical axis.
6
Knockout
⑥
Anti bird spike
(sold separately)
the knockout at the
Advertisement
Table of Contents
