Page 1
Instruction Manual (INDOOR ONLY) We appreciate your purchase of a TAKEX passive infrared REX sensor. This sensor will provide long and dependable service when properly installed. Please read this Instruction Manual carefully for correct and effective use. Please Note : This device is not intended to be used as an Intrusion Detection Unit ; it is not a burglary-preventing device.
[MAINTENANCE] 1. When the unit is soiled, clean the cover with a soft cloth The PS-520E is designed to detect infrared energy variations ● moistened with a small amount of cleansing-solution. Do not caused by the presence of a human body. Therefore, note that use chemicals such as thinners or alcohol.
INSTALLATION 1) Select the mounting location and position of sensor 2) Separate the cover from the sensor unit. (wall mount or overhead mount). Thumb Push the window. Fore nger Place nger on the knockout and pull this side to detach the cover.
OPERATION AND FUNCTION 1) Operation The sensor initiates two relay outputs and turns on the LED mode LED when it detects human body. The LED operation can be disabled by dip switch 2. The hold time of the relay can be adjusted by the timer control.
TROUBLESHOOTING Solve possible problems according to the following table. If normal operations cannot be restored by this means, contact either the dealer from whom you bought the unit or TAKEX. Trouble Check Corrective Action Correct power supply or replace broken wire.
Limited Warranty : TAKEX products are warranted to be free from defects in material and workmanship for 12 months from original date of shipment. Our warranty does not cover damage or failure caused by Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation, improper maintenance or any repairs other than those provided by TAKEX.