Built-In Dimensions - Cal Flame BBQ08874CP Owner's Manual

DEPTH
WIDTH

Built-in Dimensions

Plan the installation so that the electrical connection,
gas shut-off valve, and pressure regulator are
DEPTH
accessible inside the base enclosure. The gas valve
shall be readily accessible for hand operation. A door
WIDTH
on the enclosure to gain access to the gas valve is
acceptable, provided it is non-locking and can be
opened without the use of tools.
WIDTH
WIDTH
Burner
Convection Grills
LTR50001038, Rev. J
Locking Pin
The dimensions shown below are for Cal Flame appliances only.
Model Description
BBQ08874CP Convection 4 Burner Grill
BBQ08875CP Convection 5 Burner Grill
Model Description
BBQ08954P Deluxe Side by Side Burner
BBQ08899P Deluxe Double Side Burner
Locking Pin
The design of the outdoor cooking enclosure must allow
the LP gas cylinder to be connected and disconnected
and the connections inspected and tested.
There must be a minimum clearance of 2 inches
(51mm) between the floor of the LP-gas cylinder
enclosure and the ground.
Width
31"
38 ½"
Width
HEIGHT
25 ¼"
12 ¼"
Burner
DEPTH
HEIGHT
DEPTH
HEIGHT
Depth Height
22 ¼" 9 ¼"
DEPTH
22 ¼" 9 ¼"
Depth Height
12 ½" 7 ¼"
22" 7 ¼"
5
Minimum
Clearance
Minimum
Clearance
www.cal amebbq.com