Converting From Lp To Ng - Cal Flame BBQ08874CP Owner's Manual

Converting from LP to NG

WARNING! You must have an authorized service technician perform this procedure .
If these instructions are not followed exactly, a fire or explosion may result causing
property damage, personal injury or loss of life . Lloyd's Material Supply (LMS) will not
be held responsible for an improperly converted gas grill .
IMPORTANT: This grill does not include the parts for converting to NG. The gas conversion kit for
Cal Flame grills can be ordered separately. Ordering information can be found in this manual on page 38. The
part number for the conversion kit is BBQ07101046.
All Cal Flame grills are manufactured as standard liquid propane (LP) grills and can
be converted to burn natural gas (NG).
The conversion kit provided with your grill may include some or all of the parts
shown at right, depending on the size and model of your grill.
The kit contains orifices to convert main burners, infrared burners, and side burners.
Before you begin, make certain the LP gas source has been disconnected from the
grill.
To gain access to the NG regulator, tilt the grill forward.
Step 1: Switch the regulator behind the grill
The manifold in the image below has been removed from a grill to illustrate
this procedure.
a. Remove the LP gas line.
b. Remove the cap fitting from the end of the NG gas regulator.
c. Place the cap fitting over the LP gas inlet.
d. Insert a male flared fitting (not provided) in the NG gas regulator.
Convection Grills
LTR50001038, Rev. J
You will need:
• 13mm open end wrench
• Male flared fitting
Pipe compound suitable
for natural gas
www.cal amebbq.com
33