Rust Removal; Cleaning The Interior Of Your Grill - Cal Flame BBQ08874CP Owner's Manual

26
grain until excess liquid is removed and the surface
shines. It should not be oily to the touch, however
some residue is acceptable.
Furniture polish, such as Old English, can be effective
for polishing stainless steel and protecting the surface.
Do not use Instant Rust Out, WD-40,
or Sheila Shine near food or on food
preparation surfaces as it is a health
hazard. This includes the interior of the
grill, grill racks, stainless steel sinks, the
Caution
inside of cabinets, warming drawers, and
ovens.
NEVER spray WD-40 or Sheila Shine
near an open flame! These products
are extremely flammable while in their
Fire
aerosol forms.
Hazard

Rust Removal

It is a common misconception that stainless steel does
not rust. It does not stain, corrode, or rust as easily
as ordinary steel (it stains less), but it is not stain-
proof. If not properly protected and maintained, it can
corrode, pit, and discolor.
Because salt will accelerate rust and
corrosion, grill or barbecue island
owners who live near the beach need to
Important
be diligent in maintaining their stainless
steel hardware. You need to clean and
polish your stainless steel frequently,
apply a protectant, and ensure water
does not collect and puddle.
There are two methods of rust removal we recommend:
1 . Rust removal with Instant Rust Out:
Spray exterior stainless steel surfaces with Instant
Rust Out. Let it stand for about 30 seconds, then wipe
with a clean cloth. Apply a second time if necessary.
Instant Rust Out will leave a white residue which can
be rinsed off with water. Wipe the grill dry with a clean
cloth and apply Sheila Shine or WD-40 as a surface
protectant.
www.cal amebbq.com
2 . Rust removal with WD-40 or Sheila Shine:
Spray exterior stainless steel surfaces with WD-40 or
Sheila Shine and wipe down with a dry cloth or paper
towel until surface is free of rust. If there is significant
rust or corrosion, use a Scotch-Brite scrubber.
Both of these products will act as a surface protectant
and help resist smudges, stains, and rust.
Although nitric acid (also called aqua
fortis) can be effective for rust removal, it
is a highly corrosive chemical. Because of
the potential for injury or damage to your
Caution
stainless steel, we do not recommend
using nitric acid.

Cleaning the Interior of Your Grill

1. Thoroughly clean stains, food, and grime using
a sponge or damp cloth with warm water and a
mild dish soap. Use Fantastik or Formula 409 to
remove heavier soil.
2. Thoroughly rinse all surfaces and dry them
completely with a clean towel. Do not allow water
to accumulate and puddle on stainless steel.
Water from various sources such as garden hoses
contains iron which will give the appearance of
rusting on stainless steel. If allowed to stand for
long periods of time on stainless steel, it will cause
pitting.
3. The racks, flame tamers, and flavor bars can all
be removed for cleaning and are dishwasher safe.
Burners
Spiders and small insects occasionally inhabit or
make nests in the burner tubes, obstructing the
gas flow. Sometimes this results in a type of fire
in and around the gas tubes called "flashback". To
reduce the risk of flashback, this procedure should
be followed at least once a month or when your grill
has not been used for an extended period of time.
IMPORTANT: Prior to starting this procedure, turn
OFF all of the gas control knobs, shut off the fuel
supply, and disconnect the fuel line.
The burners can be removed by removing the
locking pins and lifting them out. The locking pins
Convection Grills
LTR50001038, Rev. J