Built-In Dimensions - Cal Flame LTR50001038 Owner's Manual

4
DEPTH

Built-in Dimensions

WIDTH
Plan the installation so that the electrical connection,
gas shut-off valve, and pressure regulator are
accessible inside the base enclosure. The gas valve
shall be readily accessible for hand operation. A door
on the enclosure to gain access to the gas valve is
acceptable, provided it is non-locking and can be DEPTH
opened without the use of tools.
WIDTH
WIDTH
12" Minimum Distance
WIDTH
www.calflamebbq.com
The dimensions shown below are for Cal Flame appliances only.
Model Description
BBQ08873P 3 Burner Grill
BBQ08874CP 4 Burner Grill
BBQ08875CP 5 Burner Grill
Model Description
BBQ08954P Deluxe Side by Side Burner
BBQ08899P Deluxe Double Side Burner
Burner
Locking Pin
The design of the outdoor cooking enclosure must
allow the LP gas cylinder to be connected and
disconnected and the connections inspected and
tested.
There must be a minimum clearance of 2 inches
(51mm) between the floor of the LP-gas cylinder
enclosure and the ground.
Width Depth
23 3/8"
31"
HEIGHT
38 ½"
Width Depth Height
25 ¼" 12 ½"
12 ¼" 22"
Burner
DEPTH
HEIGHT
DEPTH
HEIGHT
DEPTH
Height
22¼" 9 ¼"
22¼" 9 ¼"
22¼" 9 ¼"
7 ¼"
7 ¼"
Barbecue Grills
LTR50001038, Rev. C
Minimum
Clearance
Minimum
Clearance