Built-In Dimensions - Cal Flame BBQ08873P Owner's Manual

4
DEPTH

Built-in Dimensions

WIDTH
Plan the installation so that the electrical connection,
gas shut-off valve, and pressure regulator are acces-
sible inside the base enclosure. The gas valve shall be
readily accessible for hand operation. A door on the
enclosure to gain access to the gas valve is acceptable,
provided it is non-locking and can be opened without
the use of tools. DEPTH
The design of the outdoor cooking enclosure must al-
WIDTH
low the LP gas cylinder to be connected and discon-
nected and the connections inspected and tested.
There must be a minimum clearance of 2 inches (51mm)
between the floor of the LP-gas cylinder enclosure and
the ground.
WIDTH
12" Minimum Distance
WIDTH
www.calflamebbq.com
The dimensions shown below are for Cal Flame appliances only.
Model Description
BBQ08873P 3 Burner Grill
BBQ08874CP 4 Burner Grill
BBQ08875CP 5 Burner Grill
Model Description
BBQ08954P Deluxe Side by Side Burner
BBQ08899P Deluxe Double Side Burner
Burner
Locking Pin
Width Depth
23 3/8"
31"
HEIGHT
38 7/8"
Width Depth Height
25 ¼" 12 ½"
12 ¼" 22"
Burner
DEPTH
HEIGHT
DEPTH
HEIGHT
DEPTH
Height
22" 9 ¼"
22" 9 ¼"
22" 9 ¼"
7 ¼"
7 ¼"
Barbecue Grills
LTR50001038, Rev. B
Minimum
Clearance
Minimum
Clearance