Omron NX Series Network Connection Manual page 31

6
Confirm that the Result and
Actual Unit Configuration
columns show Matched and
NX-CIF210, respectively.
Click OK.
7
Select the Serial
Communications Unit in the tab
page.
Click Edit Unit Operation
Settings.
8
The Unit 1[NXBusMaster] Tab
Page is displayed.
Click All parameters and select
Ch2.
9
Check if the settings are the
same as those listed in 5.1
Serial Communications
Settings.
If the settings are different,
match the settings.
Click Transfer to Unit.
10
A confirmation dialog box is
displayed.
Click Yes.
The Transferring Dialog Box
appears and then closes.
6. Connection Procedure
28