Omron NX Series Network Connection Manual page 28

6
When you are online, a yellow
border appears in the upper part
of the Edit Pane.
7
Select Synchronize from the
Controller Menu.
8
The Synchronization Dialog
Box is displayed.
Confirm that the check box for
the data to transfer (i.e. NX1P2
on the figure on the right) is
selected, and click Transfer to
Controller.
* Executing Transfer to
Controller transfers the
project data from the Sysmac
Studio to the controller for data
comparison.
9
A confirmation dialog box
appears. Click Yes.
The Synchronizing Dialog Box
appears.
10
Confirm that the synchronized
data is now shown in the text
color of Synchronized and the
following message is displayed:
The Synchronization process
successfully finished.
If there is no problem, click
Close.
* If synchronization fails, check
the physical connections and
redo the procedure.
6. Connection Procedure
25