Banner World-Beam QS30 Installation Manual

Additional information on this product is immediately available online at
View or download additional information, including excess gain curves, beam patterns and accessories.
For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767.
Cabled Emitters
bn
10-30V dc
bu
QD Emitters
(5-pin Euro-Style)
bn
bu
wh
bk
gy
All Other Cabled Models
bn
bu
wh
Load
bk
Load
gy
All Other QD Models
(5-pin Euro-Style)
bn
bu
wh
Load
bk
Load
gy
!
WARNING . . .
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for
personnel protection.
Printed in USA
®
WORLD-BEAM
Compact, self-contained photoelectric sensors in universal-style housing
875 nm Infrared
Effective Beam:
18 mm (0.7")
630 nm Visible Red
630 nm Visible Red
P
940 nm Infrared
+
-
680 nm Visible Red
*
Only standard 2 m (6.5') cable models are listed. For 9 m (30') integral cable, add suffix "W/30" to
+
10 - 30V dc
– the model number (e.g., QS30E W/30).
QD models: For 5-pin integral Euro-style QD, add suffix "Q" (e.g., QS30EQ).
No Connection
†
Range is specified using a model BRT-84 retroreflector.
+
10 - 30V dc
–
16.0 mm
LO/DO Select
(0.63")
33.0 mm
(1.30")
+
10 - 30V dc
–
12.5 mm
(0.47")
LO/DO Select
Not To Be Used for Personnel Protection
QS30 – DC Voltage
www.bannerengineering.com/119165
Sensing Mode
Opposed
Retroreflective
Polarized Retro-
reflective
Diffuse
Fixed-Field
Cabled Models
35.0 mm
(1.38")
22.0 mm
1.3 mm (0.87")
(0.05")
44.0 mm
(1.73")
5.0 mm
(0.20")
04/09
Range Output
–
60 m (200')
†
12 m (40')
†
8 m (26')
Bipolar
NPN/PNP
1 m (3.3')
200 mm (8")
400 mm (16")
600 mm (24")
Dimensions
QD Models
Yellow and Green LEDs
M30 x 1.5 Thread
13.0 mm
max. torque
(0.51")
6 Nm (53 in lbs)
with included 30 mm
2 x ø3.3 mm (0.125")
mounting nut
max. torque
0.7 Nm (6 in lbs)
Installation
Guide
Model*
QS30E
QS30R
QS30LV
QS30LP
QS30D
QS30FF200
QS30FF400
QS30FF600
Yellow LED
Output
Indicator
P/N 119167 rev. A