Fill Level Pane - Banner ZMX Series Instruction Manual

4.4 Fill Level Pane

Use the Fill Level pane to set the parameters for the region of interest (ROI) and to view live estimated fill and peak
information.
Fill Level (%)
This bar displays live information regarding the estimated volume percent of the objects in the container. The line
corresponds to the set Fill Level Limit. The number below the bar is the estimated percent full.
Peak Height (mm)
This bar displays live information regarding the estimated height of the tallest point in the container. The line
corresponds to the set Peak Height Limit. The number below the bar is the measured height in millimeters.
Figure 15. Fill Level Pane
www.bannerengineering.com - Tel: + 1 888 373 6767
ZMX Series 3D Time of Flight Sensor
15