Kia CARNIVAL 2023 Manual page 580

What to do in an emergency
4. Unscrew the valve cap from the valve
of the defective tyre and screw the fill-
ing hose of the compressor onto the
tyre valve.
OKA4061011
CAUTION
Securely install the sealant filling hose to
the valve. If not, sealant may flow back-
ward, possibly clogging the filling hose.
5. Ensure that the compressor is
switched off, position 0.
6. Connect between compressor and the
vehicle power outlet using the cable
and connectors.
OKA4060012L
7. Make the ignition switch or ENGINE
START/STOP button on ON position.
8. Switch on the compressor and let it
run for approximately 5~7 minutes to
fill the sealant up to proper pressure.
7 28
If you have a flat tyre (with tyre mobility kit)
(refer to "Tyres and wheels" on page
9-5). The inflation pressure of the tyre
after filling is unimportant and will be
checked/corrected later. Be careful
not to overinflate the tyre and stay
away from the tyre when filling it.
When the tyre and wheel are dam-
aged, do not use Tyre Mobility Kit for
your safety.
WARNING
If the tyre pressure is below 26 psi (180
kPa), do not drive the vehicle. The tyre
may cause accident.
9. Switch off the compressor.
10.Detach the sealant feeling hose from
the valve. After using, leave the seal-
ant bottle and the compressor
attached together.
Return the TMK to its storage location in
the vehicle.
WARNING
Carbon monoxide
Do not leave your vehicle running in a
poorly ventilated area for extended peri-
ods of time. Carbon monoxide poisoning
and suffocation can occur.