Safety features of your vehicle
Installing the tumble seat in
opposite direction
1. Put the front anchor strikers along the
rear anchors on the floor.
OKA4030126L
2. Insert two front anchor strikers into
the rear anchors.
3. Lift the rear portion of the seat cush-
ion then push down firmly to lock the
catches into the front anchors until an
audible "click" is heard.
OKA4030125L
4. Make sure the green mark on the rear
seat cushion frame is visible and the
catches are locked in position by mov-
ing the seat forward and backward or
lifting the front portion of the seat. If
the green mark is invisible and the
seat moves, it is not locked properly.
OKA4030149L
5. Pull up the seatback reclining strap.
6. Lift and push the seatback backward
firmly until it clicks into place. Make
sure the seatback is locked in place.
Seat
3
3
29