Kia CARNIVAL 2023 Manual page 458

Driving your vehicle
NOTICE
僅 For more details on Drive Mode, refer
to "Drive mode integrated control sys-
tem" on page 6-47.
Warning Volume
OMQ4041606
With the engine on, select 'Driver Assis-
tance → Warning Volume from the Set-
tings menu to change the Warning
Volume to 'High', 'Medium' or 'Low' for
Smart Cruise Control.
If you change the Warning Volume, the
warning volume of other Driver Assis-
tance systems may change.
NOTICE
If the engine is restarted, Warning Vol-
ume will maintain the last setting.
Smart Cruise Control operation
Operating conditions
Smart Cruise Control will operate when
the following conditions are satisfied.
Basic function
僅 The gear is in D (Drive)
僅 The driver's door is closed
僅 EPB (Electronic Parking Brake) is not
applied
6 132
僅 Your vehicle speed is within the oper-
ating speed range
- When there is no vehicle in front:
10~180 km/h (5~110 mph)
- when there is a vehicle in front:
0~180 km/h (0~110 mph)
僅 ESC (Electronic Stability Control) or
ABS is on
僅 ESC (Electronic Stability Control) or
ABS is not controlling the vehicle
僅 Engine RPM is not in the red zone
僅 Forward Collision-Avoidance Assist
brake control is not operating
NOTICE
When stopped behind another vehicle,
the driver can turn on Smart Cruise Con-
trol whilst the brake pedal is depressed.
Overtaking Acceleration Assist
Overtaking Acceleration Assist will oper-
ate when the turn signal lever is pulled
towards the driver whilst Smart Cruise
Control is operating.
Smart Cruise Control will operate when
the following conditions are satisfied.
僅 Your vehicle speed is above 60 km/h
(40 mph)
僅 The hazard warning flasher is off
僅 A vehicle is detected in front of your
vehicle
僅 Deceleration is not needed to main-
tain distance with the vehicle in front
Smart Cruise Control (SCC)